Diagnostic Strategies

Work Flow:

WORK FLOW

NOTE:
- When LCU connectors are disconnected for more than 1 minute such as during trouble diagnoses, the "disconnected" data will be memorized by the BCM. (While BCM memorizes the "disconnected" data, IVMS communication diagnosis of CONSULT-II will display "PAST NO RESPONSE".) Therefore, after reconnecting the LCU connectors, erase the memory.
- To erase the memory, perform the procedure below.
Erase the memory with CONSULT-II or turn the ignition switch to "OFF" position and remove 7.5 A fuse (No. [14] located in the fuse block (J/B)].




DIAGNOSTIC PROCEDURE

SYMPTOM: Door warning lamp is not operating correctly.




STOP / TAIL LAMP SENSOR

Stop And Tail Lamp Sensor Inspection Table (Terminal No. 3 - 12):

STOP / TAIL LAMP SENSOR INSPECTION TABLE