Lower, Rear

REMOVAL AND INSTALLATION





- Remove upper link.





- Install upper link.





- Remove lateral link.





- Install lateral link.





- Remove lower arm with Tool.





- Install lower arm.

Before removing, put matchmarks on adjusting bolt.





- When installing, final tightening must be done under unladen condition with tires on ground.





- After installation, check wheel alignment.

INSPECTION
Rear suspension member
Replace suspension member assembly if cracked or deformed or if any part (insulator, for example) is damaged.

Upper, lower and lateral links
Replace upper, lower or lateral link as required if cracked or deformed or if bushing is damaged.

Suspension lower ball joint








- Measure swing force, turning torque and vertical end play in axial direction.
- If ball stud is worn, play in axial direction is excessive, or joint is hard to swing, replace lower arm.