Differential Case

Differential Case





1. Remove side bearing inner cones.
To prevent damage to bearing, engage puller jaws in groove.
Tool number:
(A) ST3305S001 (-)
(B) ST33061000 (38107-2)





Be careful not to confuse left- and right-hand parts.





2. Loosen ring gear bolts in a cries-cross fashion.
3. Tap ring gear off the differential case with a soft hammer. Tap evenly all around to keep ring gear from binding.





4. Loosen screws on differential cases A and B.
5. Separate differential cases A and B.