Work Flow

WORK FLOW / For VDC Models
1. Print all the data of "SELF-DIAG RESULTS" and "DATA MONITOR" for "ENGINE", "VDC" and "A/T" displayed on CONSULT-II.
Refer to DTC U1000, U1001 CAN COMMUNICATION LINE" for ENGINE.
Computers and Control Systems / System Diagnosis / Trouble Code Diagnostic Charts. Testing and Inspection
Refer to Inspection 15 CAN Communication Circuit. VDC/TCS/ABS Control unit and Steering Angle Sensor for VDC.
Antilock Brakes / Traction Control Systems / System Diagnosis.


Refer to DTC U1000 CAN COMMUNICATION LINE for A/T.
Transmission Control Systems / System Diagnosis / Trouble Code Diagnostic Procedures.

2. Attach the printed sheet of "SELF-DIAG RESULTS" and "DATA MONITOR" onto the check sheet. Refer to "CHECK SHEET".
Check Sheet

3. Based on the data monitor results, put "v" marks onto the items with "UNKWN" or "NG" in the check sheet table. Refer to "CHECK SHEET" .
Check Sheet

NOTE: If "NG" is displayed on "CAN COMM" for the diagnosed control unit, replace the control unit.

4. According to the check sheet results (example), start inspection. Refer to "CHECK SHEET RESULTS (EXAMPLE)".
Check Sheet Results (Example)