Computers and Control Systems: Technical Service Bulletins

• Recalls
  • Recall - Engine Sensor Replacement
    • Overview
    • Service Procedure
    • Owner Letter
• Customer Interest
  • Engine Conrols - MIL ON/Mutiple O2 Sensor DTC's Set
    • Overview
    • Service Procedure
  • Engine Controls - Idle Speed 25 RPM Too High
  • Engine Controls - MIL ON/DTC's P0102/P1102 Set
    • Overview
    • Service Procedure
    • Attachment 1 - Special ECM Reprog. Procedure For ECM I.D. Entry
  • Engine Vacuum System - MIL ON Condition
  • EVAP System - MIL ON/DTC P1491 Stored
  • Electrical - MIL ON/DTC's U1010 or U1000 Set
  • Engine Controls - Lack of Engine Power
    • Overview
    • Special ECM Reprogram. Proced. For ECM I.D. Entry
  • Electrical - No Crank/No Start Below 0 Degrees F.
  • Accelerator Pedal Sensor - MIL ON/DTC P0228/P1228 Set
• By Symptom
  • Customer Interest
    • Engine Conrols - MIL ON/Mutiple O2 Sensor DTC's Set
      • Overview
      • Service Procedure
    • Engine Controls - Idle Speed 25 RPM Too High
    • Engine Controls - MIL ON/DTC's P0102/P1102 Set
      • Overview
      • Service Procedure
      • Attachment 1 - Special ECM Reprog. Procedure For ECM I.D. Entry
    • Engine Vacuum System - MIL ON Condition
    • EVAP System - MIL ON/DTC P1491 Stored
    • Electrical - MIL ON/DTC's U1010 or U1000 Set
    • Engine Controls - Lack of Engine Power
      • Overview
      • Special ECM Reprogram. Proced. For ECM I.D. Entry
    • Electrical - No Crank/No Start Below 0 Degrees F.
    • Accelerator Pedal Sensor - MIL ON/DTC P0228/P1228 Set
  • Driveability
    • Engine Controls - MIL ON/DTC's P0102/P1102 Set
      • Overview
      • Service Procedure
      • Attachment 1 - Special ECM Reprog. Procedure For ECM I.D. Entry
    • Engine Controls - Lack of Engine Power
      • Overview
      • Special ECM Reprogram. Proced. For ECM I.D. Entry
  • Erratic Operation
    • Engine Controls - MIL ON/DTC's P0102/P1102 Set
      • Overview
      • Service Procedure
      • Attachment 1 - Special ECM Reprog. Procedure For ECM I.D. Entry
  • False instrument warning light/gauges
    • EVAP System - MIL ON/DTC P1491 Stored
    • Accelerator Pedal Sensor - MIL ON/DTC P0228/P1228 Set
  • Inoperative
    • Electrical - No Crank/No Start Below 0 Degrees F.
  • Loose
    • Electrical - MIL ON/DTC's U1010 or U1000 Set
  • Noise
    • Engine - MIL ON/Multiple DTC's Set
  • Recalls
    • Recall - Engine Sensor Replacement
      • Overview
      • Service Procedure
      • Owner Letter
• All Technical Service Bulletins
  • Emissions - System Readiness Test (SRT) Drive Patterns
    • Overview
    • Service Procedure
    • System Readiness Test Drive Patterns
  • Computers/Controls - CONSULT III PLUS(R) Saved Data List
  • Body Controls - Configurable BCM Replacement Information
  • Computers/Controls - Reprogramming Utilizing CONSULT(R)
  • Electrical - MIL ON/DTC P0128 Due To Remote Start Sys.
  • Engine Controls - ECM Programming Interruption Recovery
  • Engine Controls - Seized O2 Sensor Removal Procedure
  • Engine Controls - CONSULT-III(R) ECM Programming
    • Overview
    • General Procedure
  • Electrical - Electronic Component Damage Prevention
  • Engine Conrols - MIL ON/Mutiple O2 Sensor DTC's Set
    • Overview
    • Service Procedure
  • Engine - MIL ON/Multiple DTC's Set
  • Engine Controls - ECM Reprogramming Information
    • Overview
    • Service Procedure
  • Engine Controls - Idle Speed 25 RPM Too High
  • Engine Controls - MIL ON/DTC's P0102/P1102 Set
    • Overview
    • Service Procedure
    • Attachment 1 - Special ECM Reprog. Procedure For ECM I.D. Entry
  • Engine Vacuum System - MIL ON Condition
  • EVAP System - MIL ON/DTC P1491 Stored
  • Tools - New Consult-II Diagnostic Card
  • Recall - Engine Sensor Replacement
    • Overview
    • Service Procedure
    • Owner Letter
  • Engine Controls - ECM Replacement Procedures
    • Overview
    • Service Procedure
  • Electrical - MIL ON/DTC's U1010 or U1000 Set
  • Engine Controls - Lack of Engine Power
    • Overview
    • Special ECM Reprogram. Proced. For ECM I.D. Entry
  • Electrical - No Crank/No Start Below 0 Degrees F.
  • Accelerator Pedal Sensor - MIL ON/DTC P0228/P1228 Set