Timing Components

9�:

Camshaft Bracket:

Bolt length:
20 mm (0.79 inch)............(1, 2, 3, 6, 7, 8, 9, and 10 in the figure)
16 mm (0.63 inch)..............(other than the above)








Tighten in numerical order as shown in the figure.







Tighten in numerical order as shown in the figure.

Rocker Arm Cover:

RH and LH rocker covers.
Rocker cover tightening procedure:
Tighten in numerical order as shown in the figure.
Tighten bolts 1 to 10 in that order to 0.96 to 2.96 Nm (0.10 to 0.30 kg-m, 9 to 26 inch lbs.).
Then tighten bolts 1 to 10 as indicated in figure to 7.33 to 9.33 Nm (0.75 to 0.95 kg-m, 65 to 82 inch lbs.).








crankshaft pulley to crankshaft.
Tighten to 39 to 49 Nm (4.0 to 5.0 kg-m, 29 to 36 ft. lbs.).