Automatic Drive Positioner

AUTOMATIC DRIVE POSITIONER

Manual Operation
The driving position [seat position, steering wheel position (tilt, telescopic) and door mirror position] can be adjusted with the power seat switch or ADP steering switch or door mirror remote control switch.

NOTE:
- The seat can be manually operated with the ignition switch OFF.
- The door mirrors can be manually operated with the ignition switch turned ACC or ON.




Automatic Operation

NOTE:
- Disconnecting the battery erases the stored memory.
- After connecting the battery, insert the key into the ignition cylinder and turn the driver door switch ON (open) -> OFF (close) -> ON (open), the Entry/ Exiting operation becomes possible.
- After exiting operation is carried out, return operation can be operated.






NOTE: During automatic operation, if the ignition switch is turned ON -> START, the automatic operation is suspended. When the ignition switch returns to ON, it resumes.

System Description
- The system automatically moves the driver seat to facilitate entry/exit to/from the vehicle. The automatic driver positioner control unit can also store the optimum driving positions (driver seat, pedal position and door mirror position) for 2 people. If the driver is changed, one-touch operation allows changing to the other driving position.
- The settings (ON/OFF) of the automatic sliding seat (Entry/Exiting operation) at entry/exit can be changed as desired, using the display unit in the center of the instrument panel. The set content is transmitted by CAN communication, from display unit (without NAVI) or display control unit (with NAVI) to driver seat control unit.
- Using CONSULT-II, the seat slide amount at entry/exit setting can be changed.

FAIL-SAFE MODE
When any manual and automatic operations are not performed, if any motor operations of seats or tilt of steering are detected for T1 or more, status is judged "Output malfunction". Motor operation will be suspended automatically, and all automatic operations will be ineffective (in this case, the motor will not operate manually).




CANCEL OF FAIL-SAFE MODE
- The mode is cancelled when the selector lever is shifted to P position from any other position.




MEMORY STORING AND KEY FOB INTERLOCK STORING
- Store the 2 driving positions and shifts to the stored driving position with the memory switch.
- Key fob interlock function is set simultaneously with setting driving position memory. It can set driving position to memory position.

NOTE:
- If another key fob inter lock function setting is performed by same key, newly registered setting is valid.
- If new memory string is performed to memory switch that already set key fob interlock function, key fob interlock function setting is reset.
- If key does not set previously, key fob interlock function cannot set.




MEMORY SWITCH OPERATION

Selecting the memory






NOTE: The driver's seat position and steering adjustment functions (see the following table) operate simultaneously in the order of priority.




ENTRY OPERATION
When the seat are on the exiting positions, the given operation moves the seat to the previous position before the exiting operation.




EXITING OPERATION
At exit, the seat are automatically moved to the exiting position.




KEY FOB INTERLOCK OPERATION
- Perform memory operation, exiting operation and entry operation by pressing key fob unlock button.

NOTE:
- If steering wheel operation is cancelled, the system performs seat and mirror operation only.
- If Entry/Exiting operation is cancelled, the system performs steering wheel operation and mirror operation only.
- If ignition switch turns ON in the middle of memory operation, the system does not perform exiting operation after memory operation.
- If ignition switch turns ON in the middle of exiting operation, entry operation starts at that time.