Without Transmitter Activation Tool

ID REGISTRATION WITHOUT TRANSMITTER ACTIVATION TOOL
1. Turn ignition switch "OFF".
2. Connect CONSULT-II and CONSULT-II CONVERTER to data link connector.
3. Touch "AIR PRESSURE MONITOR", "WORK SUPPORT" and "ID REGIST".

NOTE: If "AIR PRESSURE MONITOR" is not indicated, go to "CONSULT-II Data Link Connector (DLC) Circuit".






4. Adjust the tire pressure to the values shown in the table for ID registration, and drive the vehicle at 15 km/h (9.4 MPH) or more for a few minutes.





5. After completing all ID registrations, press "END" to complete the procedure.