Memory Reset Procedure

MEMORY RESET PROCEDURE
1. Please observe the following instructions while confirming the sunroof operation.

NOTE: Do not disconnect the electronic power while the sunroof is operating or within 5 seconds after the sunroof stops. (to wipe-out the memory of lid position and operating friction.)

2. Initialization of system should be conducted after the following conditions.
- When the battery is out or connector is disconnected while sunroof is operating or within 5 seconds after sunroof stops.
- When the sunroof motor is changed.
- When an emergency handle is used.
- When the sunroof does not operate normally. (Incomplete initialization conditions)