Crankshaft, Engine

Pin journal diameter
Standard
Grade No.0 53.968 - 53.974 mm (2.2147 - 2.1250 inch)
Grade No.1 53.962 - 53.968 mm (2.1245 - 2.1247 inch)
Grade NO.2 53.956 - 53.962 mm (2.1243 - 2.1245 inch)
Center distance 45.96 - 45.04 mm (1.8094 - 1.8126 inch)
Out-of-round (Difference between x and y)
Limit 0.002 mm (0.0001 inch)
Taper (Difference between a and b)
Limit 0.002 mm (0.0001 inch)
Runout
Limit Less than 0.05 mm (0.002 inch)
Crankshaft end play
Standard 0.10 - 0.26 mm (0.0039 - 0.01202 inch)
Limit 0.30 mm (0.0118 inch)