Hazard Warning Switch: Service and Repair

HAZARD SWITCH




Removal and Installation (M/T)

REMOVAL
1. Remove console boot (M/T). Refer to "INSTRUMENT PANEL ASSEMBLY" in "IP" section.
2. Remove connector.
3. Remove screws.
4. Remove hazard switch.

INSTALLATION
Installation is the reverse order of removal.




Removal and Installation (A/T)

REMOVAL
1. Remove console finisher (A/T). Refer to "INSTRUMENT PANEL ASSEMBLY" in "IP" section.
2. Remove connector.
3. Remove screws.
4. Remove hazard switch.

INSTALLATION
Installation is the reverse order of removal.