ECM Harness Connector Terminal Layout and ECM Inspection Table

ECM Harness Connector Terminal Layout

ECM Harness Connector Terminal Layout Part 1:

ECM Harness Connector Terminal Layout Part 2:

ECM Harness Connector Terminal Layout Part 3:

ECM Harness Connector Terminal Layout Part 4:

ECM Harness Connector Terminal Layout Part 5:

ECM Harness Connector Terminal Layout Part 6:

ECM Harness Connector Terminal Layout Part 7:

ECM Harness Connector Terminal Layout Part 8:

ECM Harness Connector Terminal Layout Part 9:

ECM INSPECTION TABLE
Specification data are reference values and are measured between each terminal and ground. Pulse signal is measured by CONSULT-II.

CAUTION: Do not use ECM ground terminals when measuring input/output voltage. Doing so may result in damage to the ECMs transistor. Use a ground other than ECM terminals, such as the ground.