CONSULT-II Functions (IPDM E/R)

CONSULT-II Functions (IPDM E/R):

CONSULT-II Functions (IPDM E/R)

CONSULT-II OPERATION

CAUTION: If CONSULT-II is used with no connection of CONSULT-II CONVERTER, malfunctions might be detected in self-diagnosis depending on control unit which carry out CAN communication.




1. With ignition switch OFF, connect CONSULT-II and CONSULT-II CONVERTER to data link connector, then turn ignition switch ON.




2. Touch "START (NISSAN BASED VHCL)".




3. Touch "IPDM E/R" on "SELECT SYSTEM" screen.
If "IPDM E/R" is not indicated, refer to GI-38, "CONSULT-II Data Link Connector (DLC) Circuit". Data Link Connector Schematic




4. Select desired part to be diagnosed on "SELECT DIAG MODE" screen.