Disassembly and Assembly
Disassembly and AssemblyCOMPONENT (WITHOUT AUTOMATIC DRIVE POSITIONER)
DISASSEMBLY
Remove all parts from jacket tube assembly.
^ When remove tilt lever, perform as shown in the figure.
^ When remove telescopic lever, perform as shown in the figure.
INSPECTION AFTER DISASSEMBLY
Check tilt and telescopic mechanism components for malfunction. Replace if there are.
ASSEMBLY
Assemble is the reverse order of the disassembly. For tightening torque, refer to COMPONENT (WITHOUT AUTOMATIC DRIVE POSITIONER).
INSPECTION AFTER ASSEMBLY
Check tilt and telescopic mechanism operating range.
COMPONENT (WITH AUTOMATIC DRIVE POSITIONER)
Part 1:
Part 2:
DISASSEMBLY
Remove parts from jacket tube assembly. Refer to COMPONENT (WITH AUTOMATIC DRIVE POSITIONER)
INSPECTION AFTER DISASSEMBLY
Check tilt and telescopic mechanism components for malfunction. Replace if there are.
ASSEMBLY
Assemble is the reverse order of the disassembly. For tightening torque, refer to COMPONENT (WITH AUTOMATIC DRIVE POSITIONER).
INSPECTION AFTER ASSEMBLY
Check tilt and telescopic mechanism operating range.