Disassembly and Assembly
Disassembly and AssemblyDISASSEMBLY
^ Remove dust cover and push rod. Remove piston assembly and piston spring from inside cylinder body.
INSPECTION AFTER DISASSEMBLY
Check for any of the conditions shown. If any malfunction is found, replace the part concerned.
^ Damage to cylinder inner surface or piston sliding surface. Foreign matter, wear, corrosion, or pin hole
^ Settling of the spring
^ Cracked or deformed dust cover
ASSEMBLY
1. Apply rubber lubricant to cylinder body inner surface and rubber grease to piston cup and piston. Insert piston assembly and piston spring into cylinder body.
2. Apply rubber grease to dust cover and install push rod and dust cover.