Hydraulic Hose: Service and Repair

CLUTCH PIPING
Removal and Installation
Carefully observe the following steps during clutch tube removal and installation.
^ Do not spill clutch fluid onto painted surfaces. If it spills, wipe up immediately and wash the affected area





^ When fixing clutch hose to bracket, align clutch hose metal fittings with bracket positioning emboss and lock plate to secure. At this time, prevent twisting or damage of clutch hose. In addition, be careful not to damage clutch hose.
^ Tighten clutch tube flare nut to the specified torque.

CAUTION: Be careful not to damage flare nut and clutch tube.

^ Tighten union bolt to the specified torque. Refer to Removal and Installation.

CAUTION: Do not reuse copper washer.

^ After installation, bleed clutch tube. Refer to Bleeding.