Removal and Installation

TRANSFER ASSEMBLY
Removal and Installation
REMOVAL
1. Remove exhaust front tube with power tool. Refer to EXHAUST SYSTEM.
2. Remove front and rear propeller shaft. Refer to FRONT PROPELLER SHAFT and REAR PROPELLER SHAFT.
3. Disconnect transfer assembly harness connector and separate harness from transfer assembly.
4. Remove air breather hose. Refer to AIR BREATHER HOSE.
5. Support transfer assembly and transmission assembly with a jack.
6. Remove rear engine mounting member with power fool. Refer to ENGINE/ASSEMBLY.
7. Remove transfer mounting bolts and separate transfer from transmission.

CAUTION: Secure transfer assembly and transmission assembly to a lack.

INSTALLATION








Note the following, and install in the reverse order of removal.
^ When installing the transfer to the transmission, install the mounting bolts following the standard.
^ After the installation, check the fluid level and for fluid leakage.