Fog/Driving Lamp: Adjustments

Aiming Adjustment
The fog lamp is a semi-sealed beam type which uses a replaceable halogen bulb. Before performing aiming adjustment, make sure of the following.
- Keep all tires inflated to correct pressure.
- Place vehicle on level ground.




Adjust aiming in the vertical direction by turning the adjusting screw.




1. Set the distance between the screen and the center of fog lamp lens as shown.
2. Turn front fog lamps ON.
3. Adjust front fog lamps using adjusting screw so that the top edge of the high intensity zone is in the figure.
When performing adjustment, if necessary, cover the headlamps and opposite fog lamp.