Data Monitor

OPERATION PROCEDURE
1. Touch "START (NISSAN BASED VHCL)" "AIR PRESSURE MONITOR" "DATA MONITOR".
^ If "AIR PRESSURE MONITOR" is not displayed, print the "SELECT SYSTEM" screen.

NOTE: Just after starting engine, or turning ignition switch ON, it may not be displayed even if "START (NISSAN BASED VHCL)" is touched. In this case, reconnect CONSULT-II and CONSULT-II CONVERTER.

2. Return to the monitor item selection screen, and touch any of "ALL SIGNALS", "SELECTION FROM MENU".
3. Touch "START".
4. "DATA MONITOR" screen is displayed.

DISPLAY ITEM LIST:

NOTE: Before performing the self-diagnosis, be sure to register the ID, or else the actual malfunction location may be different from that displayed on CONSULT-II.