Removal and Installation
INSTRUMENT PANEL ASSEMBLYPart 1:
Part 2:
Removal and Installation
REMOVAL
1. Remove center console.
2. Remove instrument lower cover LH.
3. Remove steering column.
4. Remove glove box assembly.
5. Remove front power socket LH.
6. Remove front power socket RH. Refer to "Front Power Socket RH (For Cigarette Lighter), Console Power Socket".
7. Remove combination meter. Refer to "Lower Instrument Panel RH and Glove Box".
8. Remove audio unit.
9. Remove display unit. Refer to "DISPLAY CONTROL UNIT".
10. Remove lower knee protector LH.
11. Remove GPS antenna.
12. Remove optical sensor.
13. Remove side ventilator assembly LH.
14. Remove side ventilator assembly RH.
15. Remove front pillar finisher.
16. Remove passenger air bag module. Refer to "FRONT PASSENGER AIR BAG MODULE"
17. Remove instrument panel.
18. Disconnect remaining instrument panel assembly electrical connectors.
INSTALLATION
Installation is in the reverse order of removal.
CLUSTER LID C
CAUTION: When removing and installing, place shop cloths onto surrounding parts to protect A/T finisher and center console from damage.
Removal
1. Disconnect battery negative terminal.
2. Remove A/T finisher.
3. Remove center console. Refer to "INSTRUMENT PANEL ASSEMBLY".
4. Pull to disconnect cluster lid C clips.
5. Disconnect cluster lid C electrical connectors.
Installation
Installation is in the reverse order of removal.
CLUSTER LID D
CAUTION: When removing and installing, place shop cloths onto surrounding parts to protect A/T finisher and center console from damage.
Removal
1. Remove cluster lid C.
2. Remove instrument lower cover LH.
3. Remove glove box.
4. Pull to disconnect cluster lid D clips.
5. Disconnect cluster lid electrical connectors.
Installation
Installation is in the reverse order of removal.
INSTRUMENT LOWER COVER LH
Removal
1. Remove instrument lower cover LH, using power tool.
2. Pull to disconnect instrument lower cover LH clips.
3. Disconnect instrument lower cover LH electrical connectors.
Installation
Installation is in the reverse order of removal.
COMBINATION METER
Removal
1. Disconnect battery negative terminal.
2. Remove instrument lower cover LH.
3. Remove steering column cover upper and steering column cover lower.
4. Remove combination meter cover.
5. Remove cluster lid A.
6. Disconnect cluster lid A electrical connectors.
7. Remove the combination meter screws, using power tool.
8. Disconnect combination meter electrical connectors.
Installation
Installation is in the reverse order of removal.
A/T FINISHER
Removal
1. Remove shift knob.
2. Remove storage compartment mask.
3. Pull to disconnect AT finisher clips.
4. Disconnect A/T finisher electrical connectors.
Installation
Installation is in the reverse order of removal.
Lower Instrument Panel RH and Glove Box
REMOVAL AND INSTALLATION
Removal
1. Remove the instrument lower cover RH.
2. Remove glove box assembly screws, using power tool.
3. Disconnect glove box lamp.
Installation
Installation is in the reverse order of removal.
Center Console
Part 1:
Part 2:
REMOVAL AND INSTALLATION
Removal
1. Move front seats forward.
2. Disconnect battery negative terminal.
3. Remove control device.
4. Remove glove box assembly. Refer to "Lower Instrument Panel RH and Glove Box".
5. Remove center console lower cover RH.
6. Remove console cover RH screws.
7. Remove center console lower cover LH.
8. Remove console cover LH screws.
9. Disconnect center console electrical connectors.
10. Remove center console assembly in a rearward direction.
Installation
Installation is in the reverse order of removal.
Rear Console
REMOVAL AND INSTALLATION
Removal
1. Remove cup holder insert.
2. Release latch and remove rear console assembly.
Installation
Installation is in the reverse order of removal.