Mirrors - Door Mirror Actuator Inoperative
Classification: BT06-006AReference: ITB06-020A
Date: April 2, 2009
2004-2006 QX56;
MANUAL OR POWER DOOR MIRROR ACTUATOR INOPERABLE
This bulletin has been amended. The Parts Information section has been updated. No other changes have been made. Please discard all previous versions of this bulletin.
APPLIED VEHICLE(S): 2004-2006 QX56 (JA60)
IF YOU CONFIRM
The door mirror actuator needs to be replaced.
ACTION
^ Do not replace the complete door mirror assembly.
^ Replace only the door mirror actuator.
IMPORTANT:
The purpose of ACTION (above) is to give you a quick idea of the work you will be performing. You MUST closely follow the entire Service Procedure as it contains information that is essential to successfully completing the repair.
PARTS INFORMATION
CLAIMS INFORMATION
SERVICE PROCEDURE
1. Pull UP on the bottom side of the mirror to separate the glass from the actuator.
2. Separate the electrical connectors from the mirror.
NOTE:
^ Some mirrors have heater and turn signal connectors.
3. Remove the actuator base mounting screw(s).
4. Pry off the bottom side actuator hook(s) to separate the actuator from the housing (if necessary).
NOTE:
Some actuators will not require prying. They will separate after removing the screw(s) in step 3.
5. Disconnect the motor electrical connector(s).
6. Remove the old actuator motor.
7. Install the new actuator motor in the reverse order of removal.