Transmitter Wake Up Operation

Transmitter Wake Up Operation

WITH TRANSMITTER ACTIVATION TOOL





1. With the transmitter activation tool (J-45295) pushed against the front left transmitter, press the button for 5 seconds.
Tool number (J-45295).
^ With ignition switch ON, as the warning lamp flashes per the following diagram, the respective transmitter then must be woken up.





2. When the BCM finishes assigning each tire ID, the BCM flashes the hazard warning lamps and trailer flasher lamps (if equipped) and sends flashing indicator status by CAN according to the following time chart. Please see trailer flasher specification details of trailer flashing lamps since the BCM controls trailer flasher lamps as brake lamps.
3. After completing wake up of all transmitters, make sure low tire pressure warning lamp goes out.

CONSULT-II Function (BCM)





CONSULT-II can display each diagnostic item using the diagnostic test modes shown following.