Trunk Room Trim

TRUNK ROOM TRIM

Exploded View

INT-27 Exploded View:

Removal and Installation

REMOVAL
1. Fully open trunk lid assembly.
2. Remove trunk floor carpet.
3. Remove trunk rear plate mounting pawls and metal clips, and then remove trunk rear plate.
4. Remove trunk floor cover mounting clips, and then remove trunk floor cover.
5. Remove trunk weather-strip.
6. Remove trunk rear finisher mounting clips and trunk net hook, and then remove trunk rear finisher.
7. Remove trunk center box.
8. Remove spare tire.
9. Remove rear seatback welt.
10. Remove trunk front finisher mounting clips and metal clips, and then remove trunk front finisher.
11. Remove trunk side finisher mounting clip and metal clip, and then remove trunk side finisher (LH/RH).
12. Remove jack.
13. Remove trunk floor spacer mounting nuts, and then remove trunk floor spacer (LH/RH).

INSTALLATION
Install in the reverse order of removal.

CAUTION: Check that clips, pawls, metal clips are securely fitted in panel holes on body when installing, and then press them in.