Rear Shelf: Service and Repair

REAR PARCEL SHELF FINISHER

Exploded View

INT-17 Exploded View:

Removal and Installation

REMOVAL
1. Remove trunk front finisher upper (without REAR SPOILER).




2. Disconnect high-mounted stop lamp harness connector (A). (without REAR SPOILER)
3. Remove rear seat cushion and rear seatback.
4. Remove rear side finisher and rear pillar finisher.




5. Remove rear parcel shelf finisher mounting clips (A).
6. Remove rear seat striker cover fixing pawls, and then remove rear seat striker cover.
7. Pull rear parcel shelf finisher, and then remove rear parcel shelf finisher.
8. Remove the following parts after removing rear parcel shelf finisher.
- Child anchor cover.
- Rear speaker grille.
- High-mounted stop lamp (without REAR SPOILER).

INSTALLATION
Install in the reverse order of removal.

CAUTION: Check that clips are securely fitted in panel holes on body when installing, and then press them in.