Power Adjustable Steering Column Switch: Service and Repair

TILT&TELESCOPIC SWITCH

Removal and Installation

REMOVAL

CAUTION: When removing and installing, use shop cloths to protect parts from damage.

1. Disconnect battery negative terminal.
2. Remove the steering column mask (1).




3. Press pawls and remove tilt & telescopic switch (2) from the steering column mask (1).

INSTALLATION
Install in the reverse order of removal.

CAUTION: Clamp the harness in position.

NOTE: After installing the tilt & telescopic switch, perform additional service when removing battery negative terminal. Refer to SE-7, "ADDITIONAL SERVICE WHEN REMOVING BATTERY NEGATIVE TERMINAL : Special Repair Requirement". Testing and Inspection