Refilling

Refilling





1. Remove filler plug (1). Fill with new gear oil to transmission as shown in the figure.
Oil grade and viscosity: Refer to MA-10, "Fluids and Lubricants".

Oil capacity: Refer to TM-74, "General Specification". General Specification
2. After refilling gear oil, check oil level. Refer to TM-16, "Inspection". Inspection
3. Set a gasket on filler plug and then install it to transmission case.

CAUTION:
Never reuse gasket.

4. Tighten filler plug to the specified torque. Refer to TM-29, "Exploded View". Exploded View