Overhaul

REAR SEAT

Disassembly and Assembly

BENCH SEAT

Disassembly of Seat Cushion
Remove the hog rings to separate the trim and pad.

Assembly of Seat Cushion
Assemble in the reverse order of disassembly. Be careful of the following one point.




Install hog rings of seat cushion trim in position, and then securely connect the trim or trim code with the pad side wire.

Disassembly of Seatback




1. Remove the headrest holder.
2. Remove the seat belt guide.
3. Remove the hog rings to separate the trim and pad.

Assembly of Seatback
Assemble in the reverse order of disassembly. Be careful of the following one point.




Install hog rings of seat cushion trim in position, and then securely connect the trim or trim code with the pad side wire.

Disassembly of Armrest
1. Remove the armrest from seatback.
- Remove the retainer from the side of armrest lid in the back.
- Remove the armrest mounting nuts on the back of seatback.

2. Disassemble the armrest.





- Remove the screws, and then remove armrest lid hinge.
- Remove the armrest lid.
- Remove screws, and then remove the armrest lock assembly from the armrest lid.





- Pull the rear seat box rearward and lift up, and then remove rear seat box from the armrest assembly.

CAUTION:
- When removing, check that front tab is not damaged.
- If the tab is damaged when removing the rear seat box, replace rear seat box with a new one.

Assembly of Armrest
Assemble in the reverse order of disassembly.

POWER SEAT

Disassembly of Seat Cushion
Remove the hog rings to separate the trim and pad.

Assembly of Seat Cushion
Assemble in the reverse order of disassembly.

Disassembly of Seatback




1. Remove the headrest holder.
2. Remove the seat belt guide.
3. Remove the hog rings to separate the trim and pad.

Assembly of Seatback
Assemble in the reverse order of disassembly. Be careful of the following one point.




Install hog rings of seat cushion trim in position, and then securely connect the trim or trim code with the pad side wire.

Disassembly of Seat Frame
1. Disconnect the harness connectors, remove the screws,and then remove the rear seat control unit.
2. Remove the seatback hook and seat cushion hook.

Assembly of Seat Frame
Assemble in the reverse order of removal.

Disassembly of Armrest
1. Remove the armrest from seatback center.
- Remove the retainer from the side of armrest lid in the back.
- Remove the armrest mounting nuts on the back of seatback.

2. Disassemble the armrest.





- Remove the screws, and then remove the armrest hinge cover.
- Remove the screws, and then remove the armrest lid hinge.
- Remove the armrest lid.
- Remove the screws, and then remove the armrest lid lock assembly from the armrest lid.
- Remove the rear seat box.
- Remove all switches from the rear seat box.
- Remove the screws, and then remove the A/C box assembly.
- Remove the screws, and then remove the cup holder.
- Remove the hog rings, and then remove the seat back center side trim.
- Remove the headrest holder, and then remove the seatback center trim.

Assembly of Armrest
Assemble in the reverse order of removal.