Tail Lamp: Service and Repair

STOP/TAIL LAMP
Replacement integral with rear combination lamp.

Stop/tail lamp : LED

Removal and Installation

LT-227 Exploded View:

REMOVAL

CAUTION: Disconnect the battery negative terminal or remove the fuse.

1. Remove trunk side finisher.
2. Disconnect rear combination lamp connector.
3. Remove rear combination lamp finisher.
4. Remove rear combination lamp mounting bolts.
5. Pull the rear combination lamp toward rear of the vehicle and remove from the vehicle.
6. Remove seal packing from the vehicle.

INSTALLATION
Installation is the reverse order of removal.

CAUTION: Seal packing cannot be reused.