Removal and Installation

REAR CAMERA


Removal and Installation


REMOVAL
1. Remove back door finisher inner. Refer to .
2. Remove back door outside finisher upper. Refer to .
3. Remove back door outside finisher lower. Refer to .
4. Remove rear camera mounting screws and rear camera harness connector.
5. Remove rear camera.

INSTALLATION
1. Installation is the reverse order of removal.
2. Perform camera image calibration. Refer to Description Special Repair Requirement, "CALIBRATING CAMERA IMAGE (AROUND VIEW MONITOR) : Special Repair Requirement".

CAUTION:
Perform the calibration and perform the writing to the around view monitor control unit when removing and replacing each camera, removing the camera mounting parts (front grille, door mirror, etc.) and replacing the around view monitor control unit.