Removal and Installation

SIDE CAMERA RH


Removal and Installation


REMOVAL
1. Remove door mirror glass (passenger side). Refer to Without ADP.





2. Remove screws (A) and door mirror actuator connector, and then door mirror actuator (1).
3. Remove door mirror under cover. Refer to Without ADP.





4. Remove screws (A) and connector (1), and then remove side camera (RH).

INSTALLATION
1. Installation is the reverse order of removal.
2. Perform camera image calibration. Refer to Description Special Repair Requirement, "CALIBRATING CAMERA IMAGE (AROUND VIEW MONITOR) : Special Repair Requirement".

CAUTION:
Perform the calibration and perform the writing to the around view monitor control unit when removing and replacing each camera, removing the camera mounting parts (front grille, door mirror, etc.) and replacing the around view monitor control unit.