Diagnosis Procedure

FUEL LID LOCK ACTUATOR


Description

Locks/unlocks the fuel filler lid with the signal from BCM.




FUEL LID LOCK ACTUATOR


Diagnosis Procedure

1.CHECK FUEL LID LOCK ACTUATOR INPUT SIGNAL
1. Turn ignition switch OFF.
2. Disconnect fuel lid lock actuator connector.
3. Check voltage between fuel lid lock actuator harness connector and ground.





Is the inspection result normal?
YES - Replace fuel lid lock actuator. Refer to Removal and Installation.
NO - GO TO 2.
2.CHECK FUEL LID LOCK ACTUATOR CIRCUIT
1. Disconnect BCM connector.
2. Check continuity between BCM harness connector and fuel lid lock actuator harness connector.





3. Check continuity between BCM harness connector and ground.





Is the inspection result normal?
YES - Replace BCM. Refer to Removal and Installation.
NO - Repair or replace harness.