Disassembly and Assembly

CENTER CONSOLE ASSEMBLY


Disassembly and Assembly


CAUTION:
When disassembling, always use a remover tool that is made of plastic.

DISASSEMBLY
1. Remove console lid assembly.
- Open the console lid.





- Remove console mask (1) fixing pawls with remover tool (A).





- Remove console lid assembly (1) fixing screws (A), and then remove console lid assembly.
2. Remove console pocket.
3. Reverse a center console assembly.





4. Remove console sub harness.
- Remove console sub harness (1) fixing screws (A).
- Remove console sub harness fixing clip (B).
- Disconnect switch connectors.





5. Remove switch panel.
- Remove switch panel (1) fixing screws (A).
- Pull back switch panel.





6. Remove console pad LH.
- Remove console pad LH (1) fixing screws (A).
- Pull the console pad LH crosswise.





7. Remove console pad RH.
- Remove console pad RH (1) fixing screws (A).
- Pull the console pad RH crosswise.





8. Remove console center bracket.
- Remove console center bracket (1) fixing screws (A).
- Pull up console center bracket.





9. Remove console upper bracket.
- Remove console upper bracket (1) fixing screws (A).
- Pull up console upper bracket.





10. Remove cup holder assembly.
- Remove cup holder assembly (1) fixing screws (A).
- Pull up cup holder assembly.





11. Remove power outlet (1). Refer to Removal and Installation.
12. Remove auxiliary input jacks (2). Refer to Removal and Installation.
13. Remove i-pod connector (3). Refer to Removal and Installation.





14. Remove console finisher.
- Disengage pawls while pulling console finisher (1).
- Pull up console finisher.

ASSEMBLY
Assemble in the reverse order of disassembly.