Keyless Entry Transmitter: Service and Repair

INTELLIGENT KEY BATTERY


Removal and Installation

1. Release the lock knob at the back of the Intelligent Key and remove the mechanical key.





2. Insert a flat-blade screwdriver (A) wrapped with a cloth into the slit of the corner and twist it to separate the upper part from the lower part.

CAUTION:
- Do not touch the circuit board or battery terminal.
- The key fob is water-resistant. However, if it does get wet, immediately wipe it dry.
3. Replace the battery with new one.

Battery replacement :Coin-type lithium battery (CR2025)






4. Align the tips of the upper and lower parts, and then push them together until it is securely closed.

CAUTION:
- When replacing battery, keep dirt, grease, and other foreign materials off the electrode contact area.
- After replacing the battery, check that all Intelligent Key functions work normally.