Selective Unlock Function Does Not Operate With Door Request Switch

SELECTIVE UNLOCK FUNCTION DOES NOT OPERATE WITH DOOR REQUEST SWITCH


Description


NOTE:
- Before performing the diagnosis in the following procedure, check "Work Flow". Refer to Diagnosis and Repair Work Flow.
- Check that vehicle is under the condition shown in "Conditions of vehicle" before starting diagnosis, and check each symptom.

CONDITIONS OF VEHICLE (OPERATING CONDITIONS)
- Intelligent Key is removed from key slot.
- Ignition switch is in OFF position.
- No Intelligent Keys are inside the vehicle.




SELECTIVE UNLOCK FUNCTION DOES NOT OPERATE WITH DOOR REQUEST SWITCH


Diagnosis Procedure

1.CHECK DOOR LOCK FUNCTION
Check door lock function by door request switch.
Does door lock/unlock with door request switch?
YES - GO TO 2.
NO-1 - Go to Driver Side (driver side).
NO-2 - Go to Passenger Side (passenger side).
NO-3 - Go to Back Door (back door).
2.CHECK "DOOR LOCK�UNLOCK SET" SETTING IN "WORK SUPPORT"
Check "DOOR LOCK-UNLOCK SET" setting in "WORK SUPPORT". Refer to Intelligent Key.
Is the inspection result normal?
YES - GO TO 3.
NO - Set "DOOR LOCK-UNLOCK SET" in "WORK SUPPORT".
3.CONFIRM THE OPERATION
Confirm the operation again.
Is the result normal?
YES - Check intermittent incident. Refer to Intermittent Incident.
NO - GO TO 1.