Removal and Installation

PERSONAL LAMP


Removal and Installation


CAUTION:
Disconnect the battery negative terminal or remove the fuse.

REMOVAL
1. Remove the headlining assembly. Refer to Exploded View.
2. Insert any appropriate tool into the gap between the lens. Remove the lens.





3. Press the both side pawls (A) to the arrow direction ( ).
Remove the personal lamp finisher.
4. Remove the personal lamp case from the headlining assembly.

NOTE:
Replace the personal lamp case as a set (right and left).

INSTALLATION
Install in the reverse order of removal.

NOTE:
The following is easier to install the personal lamp finisher.





- Press the personal lamp finisher to the headlining. Pull the personal lamp case pawl to the arrow direction ( ) with any appropriate tool.