Removal and Installation

IPDM E/R (INTELLIGENT POWER DISTRIBUTION MODULE ENGINE ROOM)


Removal and Installation


CAUTION:
IPDM E/R integrated relays are not serviceable parts, and must not be removed from the unit.

REMOVAL
1. Disconnect the battery cable from the negative terminal.





2. Remove the cowl top cover (RH). Refer to Exploded View.
3. Pull up the IPDM E/R assembly while pressing the pawls (A) on the back of the IPDM E/R cover B (1).





4. Remove the IPDM E/R cover A (1) while pressing the pawls (A) at the lower end of the IPDM E/R cover A.
5. Disconnect the harness connector and remove the IPDM E/R
(2).





6. Remove the bolts (A) and remove the bracket (1) from the vehicle.

INSTALLATION
Install in the reverse order of removal.