P1715

P1715 INPUT SPEED SENSOR





Description
ECM receives input speed sensor signal from TCM through CAN communication line. ECM uses this signal for engine control.




DTC Logic

DTC DETECTION LOGIC

NOTE:
- If DTC P1715 is displayed with DTC UXXXX first perform the trouble diagnosis for DTC UXXXX.
- If DTC P1715 is displayed with DTC P0335, first perform the trouble diagnosis for DTC P0335. Refer to P0335.
- If DTC P1715 is displayed with DTC P0340, first perform the trouble diagnosis for DTC P0340. Refer to P0340.
- If DTC P1715 is displayed with DTC P0605, first perform the trouble diagnosis for DTC P0605. Refer to P0605.
- If DTC P1715 is displayed with DTC P0607, first perform the trouble diagnosis for DTC P0607. Refer to P0607.

DTC DETECTION LOGIC:

Diagnosis Procedure
1.CHECK DTC WITH TCM
Check DTC with TCM. Refer to On Board Diagnostic (OBD) System.
Is the inspection result normal?
YES - GO TO 2.
NO - Perform trouble shooting relevant to DTC indicated.
2.REPLACE TCM
Replace TCM.
- INSPECTION END