Hazard and Horn Reminder Does Not Operate

HAZARD AND HORN REMINDER DOES NOT OPERATE


Description


NOTE:
- Before performing the diagnosis following procedure, check "Work Flow". Refer to Diagnosis and Repair Work Flow.
- Check that vehicle is under the condition shown in "Conditions of vehicle" before starting diagnosis, and check each symptom.

CONDITIONS OF VEHICLE (OPERATION CONDITIONS)
- Ignition switch is in OFF or LOCK position.
- Intelligent Key is removed from key slot.




HAZARD AND HORN REMINDER DOES NOT OPERATE


Diagnosis Procedure

1.CHECK "HAZARD ANSWER BACK" SETTING IN "WORK SUPPORT"
Check "HAZARD ANSWER BACK" setting in "WORK SUPPORT". Refer to Intelligent Key.
Is the inspection result normal?
YES - GO TO 2.
NO - Set "HAZARD ANSWER BACK" setting in "WORK SUPPORT".
2.CHECK "HORN WITH KEYLESS LOCK" SETTING IN "WORK SUPPORT".
Check "HORN WITH KEYLESS LOCK" setting in "WORK SUPPORT". Refer to Intelligent Key.
Is the inspection result normal?
YES - GO TO 3.
NO - Set "HORN WITH KEYLESS LOCK" setting in "WORK SUPPORT".
3.CHECK HAZARD WARNING LAMP
Check hazard warning lamp. Refer to Component Function Check.
Is the inspection result normal?
YES - GO TO 4.
NO - Repair or replace the malfunctioning parts.
4.CHECK HORN
Check horn. Refer to Component Function Check.
Is the inspection result normal?
YES - GO TO 5.
NO - Repair or replace the malfunctioning parts.
5.CONFIRM THE OPERATION
Confirm the operation again.
Is the result normal?
YES - Check intermittent incident. Refer to Intermittent Incident.
NO - GO TO 1.