Disassembly

FRONT CARRIER, INPUT CLUTCH, REAR INTERNAL GEAR


Disassembly






1. Compress snap ring with two flat-bladed screwdrivers.
2. Remove front carrier assembly and input clutch assembly from rear internal gear.
3. Remove front carrier assembly from input clutch assembly.





4. Remove bearing race from front carrier assembly.





5. Remove needle bearing from front carrier assembly.





6. Remove snap ring from front carrier assembly.

CAUTION:
Never expand snap ring excessively.





7. Remove O-ring and seal rings from input clutch assembly.





8. Remove needle bearing from input clutch assembly.





9. Remove snap ring from input clutch drum with a flat-bladed screwdriver.
10. Remove drive plates, driven plates, dish plate and retaining plate from input clutch drum.