System Description

AUTOMATIC DRIVE POSITIONER SYSTEM


EXIT ASSIST FUNCTION : System Description


OUTLINE
When exiting, the condition is satisfied, the seat is moved backward 40 mm (1.57 in) from normal sitting position and the steering is moved to the most upper position and front position.
The seat slide amount and the steering operation at entry/exit operation can be changed.

NOTE:
- This function is set to ON before delivery (initial setting).
- Further information for the system setting procedure. Refer to Description.

OPERATION PROCEDURE
1. Open the driver door with ignition switch in OFF position.
2. Driver seat and steering column will move to the exiting position.

OPERATION CONDITION
Satisfy all of the following items. The exit assist function is not performed if these items are not satisfied.






DETAIL FLOW