Removal and Installation

FUEL FILLER LID OPENER


Removal and Installation


NOTE:
When fuel filler lid lock actuator (1) is a defective operation, pull the rod to open fuel filler lid.






REMOVAL
1. Remove luggage side finisher lower (RH). Refer to Removal and Installation.
2. Pull and remove lock and cable assembly forward, while pushing the pawls.
3. Rotate lock nut counterclockwise, and then remove lock nut.
4. Push fuel filler lid lock actuator behind the vehicle, while pushing the pawl.
5. Disconnect harness connector and remove fuel filler lid lock actuator.
6. Remove mounting screws, and then remove fuel filler lid.

INSTALLATION
Install in the reverse order of removal.

CAUTION:
After installation, apply touch-up paint (the body color) onto the head of fuel filler lid mounting screws.