Removal and Installation

FENDER PROTECTOR


FENDER PROTECTOR : Removal and Installation


REMOVAL
1. Remove front fillet molding. Refer to Removal and Installation.





2. Remove front fender protectors (front and rear side) fixing grommets (A) with a remover tool (B).
3. Remove center mud guard (1) fixing screw (A).





5. Remove fender protector (rear) fixing clips.
6. Disengage fender clip from front fender arches, and then remove fender protector (rear).





7. Remove fender protector (front) fixing bolts (A).
8. Remove fender protector (front) mounting clips.
9. Remove fender clip from wheel house arches, and then remove fender protector (front) from wheel house.
10. Remove the following parts after removing front fender protector.
- Fender clips
- J-nut

INSTALLATION
Install in the reverse order of removal.