Removal and Installation

DOOR PARTING SEAL


Removal and Installation


REMOVAL

FRONT DOOR PARTING SEAL
1. Fully open front door.





2. With a remover tool (A), disengage the clips from the front door parting seal (1).

CAUTION:
- Disengage the clips slowly and carefully.
- Never pull the front door parting seal strongly.
3. Remove front door parting seal.

REAR DOOR PARTING SEAL (LOWER)
1. Fully open rear door.





2. With a remover tool (A), disengage the clips from the rear door parting seal (1).

CAUTION:
- Disengage the clips slowly and carefully.
- Never pull the rear door parting seal strongly.
3. Remove rear door parting seal.

REAR DOOR PARTING SEAL (FRONT)
1. Fully open front door.
2. Pull back rear door parting seal (front).

CAUTION:
Never bend the rear door parting seal strongly.

INSTALLATION
Install in the reverse order of removal.

CAUTION:
- When installing door parting seal, check that blind clips are securely fitted in door panel holes, and then press them in.
- When installing, visually check the door parting seal and the clips, then replace them with new parts if they are damaged.
- Replace double-faced adhesive tape with a new one, if the rear door parting seal (front) is reused.
- Remove double-faced adhesive tape remaining on body and back of rear door parting seal (front) with a double-faced adhesive tape remover, after removing rear door parting seal (front).
- Never wash the vehicle within 24 hours after installing so as to keep adhesive.