DCA

ICC SENSOR INTEGRATED UNIT


Removal and Installation


REMOVAL
1. Remove front bumper fascia. Refer to Exploded View.
2. Remove air guide lower (LH). Refer to Exploded View.
3. Disconnect ICC sensor integrated unit connector.
4. Remove mounting bolts from ICC sensor integrated unit.
5. Remove ICC sensor integrated unit.

INSTALLATION
Install in the reverse order of removal.

CAUTION:
Always perform the laser beam aiming adjustment and check the operation after the replacement, removal, and installation of ICC sensor integrated unit.

Refer to DCA DCA Description Special Repair Requirement, "ADDITIONAL SERVICE WHEN REPLACING CONTROL UNIT (ICC SENSOR INTEGRATED UNIT) : Description".