Hazard and Buzzer Reminder Does Not Operate

HAZARD AND BUZZER REMINDER DOES NOT OPERATE


Description


NOTE:
- Before performing the diagnosis in the following procedure, check "Work Flow". Refer to Diagnosis and Repair Workflow.
- Check that vehicle is under the condition shown in "Conditions of vehicle" before starting diagnosis, and check each symptom.

CONDITIONS OF VEHICLE (OPERATING CONDITIONS)
- Intelligent Key is removed from key slot.
- Ignition switch is in the OFF position.
- No Intelligent Keys are inside the vehicle.




HAZARD AND BUZZER REMINDER DOES NOT OPERATE


Diagnosis Procedure

1.CHECK "HAZARD ANSWER BACK" SETTING IN "WORK SUPPORT"
Check "HAZARD ANSWER BACK" setting in "WORK SUPPORT". Refer to Door Lock.
Is the inspection result normal?
YES - GO TO 2.
NO - Set "HAZARD ANSWER BACK" in "WORK SUPPORT".
2.CHECK "ANS BACK I-KEY LOCK" SETTING IN "WORK SUPPORT"
Check "ANS BACK I-KEY LOCK" setting in "WORK SUPPORT". Refer to Door Lock.
Is the inspection result normal?
YES - GO TO 3.
NO - Set "ANS BACK I-KEY LOCK" in "WORK SUPPORT".
3.CHECK "ANS BACK I-KEY UNLOCK" SETTING IN "WORK SUPPORT"
Check "ANS BACK I-KEY UNLOCK" setting in "WORK SUPPORT". Refer to Door Lock.
Is the inspection result normal?
YES - GO TO 4.
NO - Set "ANS BACK I-KEY UNLOCK" in "WORK SUPPORT".
4.CHECK HAZARD WARNING LAMP
Check hazard warning lamp. Refer to Component Function Check.
Is the inspection result normal?
YES - GO TO 5.
NO - Repair or replace the malfunctioning parts.
5.CHECK INTELLIGENT KEY WARNING BUZZER
Check Intelligent Key warning buzzer. Refer to Component Function Check.
Is the inspection result normal?
YES - GO TO 6.
NO - Repair or replace the malfunctioning parts.
6.CONFIRM THE OPERATION
Confirm the operation again.
Is the result normal?
YES - Check intermittent incident. Refer to Intermittent Incident.
NO - GO TO 1.