With Rear Active Steer

POWER STEERING SOLENOID VALVE


Component Inspection

1.POWER STEERING SOLENOID VALVE INSPECTION
1. Turn the ignition switch OFF.
2. Disconnect the power steering solenoid valve harness connector.
3. Check the resistance between power steering solenoid valve connector terminals.





4. Check for click sound (power steering solenoid valve activation sound) when applying approximately 12 V between the power steering solenoid valve connector terminals.

CAUTION:
- Never make the terminals short.
- Assign the positive terminal to No. 1 terminal, and the negative terminal to No. 2 terminal. Connect the fuse between the terminals when applying the voltage.
Is the inspection result normal?
YES - INSPECTION END
NO - Repair the steering gear. Refer to Exploded View.
NO - Repair the steering gear. Refer to Exploded View.