Rear Shock Absorber

REAR SHOCK ABSORBER


Inspection


INSPECTION AFTER REMOVAL
Check the following items, and replace the parts if necessary.
- Shock absorber assembly for deformation, cracks, damage.
- Welded and sealed areas for oil leakage.

INSPECTION AFTER INSTALLATION
1. Check shock absorber actuator harness connector for proper connection (with Continuous Damping Control).
2. Check wheel alignment. Refer to Inspection.
3. Adjust neutral position of steering angle sensor. Refer to Description Special Repair Requirement Description Special Repair Requirement
INSPECTION AFTER DISASSEMBLY

Bound Bumper and Bushing
Check bound bumper cover and bushing for cracks and damage. Replace it if necessary.

Shock Absorber
Check the following items, and replace the part if necessary.
- Shock absorber for deformation, cracks, and other damage.
- Piston rod for damage, uneven wear, and distortion.

INSPECTION AFTER ASSEMBLY
Make sure piston rod on shock absorber is not damaged when attaching components to shock absorber.