Rear Suspension Assembly

REAR SUSPENSION ASSEMBLY


Inspection


MOUNTING INSPECTION
Make sure the mounting conditions (looseness, backlash) of each component and component conditions
(wear, damage) are normal.

BALL JOINT AXIAL END PLAY
1. Place an iron bar or equivalent between transverse link or upper link and steering knuckle.
2. Measure axial end play by playing it up and down.

Standard
Axial end play : Refer to "Ball Joint". Ball Joint


CAUTION:
Be careful not to damage ball joint boot.

SHOCK ABSORBER
Check for oil leakage and damage. Replace it if necessary.