Removal and Installation

AIR BREATHER HOSE


AWD : Removal and Installation


REMOVAL
1. Remove air breather vent from water outlet (rear).
2. Remove front propeller shaft.
3. Remove air breather hose.

INSTALLATION
Note the following, and install in the reverse order of removal.

CAUTION:
- When installing air breather hose, be careful not to be crushed or blocked by folding or bending the hose.





- When inserting air breather hose to the air breather vent (for
A/T) (1), be sure to insert it fully until its end reaches the tube bend "R" portion.
- Install air breather hose to air breather vent (for A/T) so that the paint mark is facing upward.
- Ensure clips are securely installed to brackets when installing air breather hose to brackets.