B2462

B2462 VHCL DISTANCE SIGNAL





Description
Inputs the distance signal of two vehicles from ICC sensor integrated unit via CAN communication.




DTC Logic

DTC DETECTION LOGIC

NOTE:
If DTC B2462 is displayed with DTC U1000, first perform the trouble diagnosis for DTC U1000. Refer to CAN COMM Circuit.

DTC Detection Logic:

DTC CONFIRMATION PROCEDURE
1.SELF-DIAGNOSIS WITH PRE-CRASH SEAT BELT CONTROL UNIT
1. Turn ignition switch ON.
2. Check "Self-diagnostic result" with CONSULT-III.
Is DTC detected?
YES - Refer to B2462.
NO - INSPECTION END




Diagnosis Procedure
1.CHECK DTC WITH "ICC SENSOR INTEGRATED UNIT"
Check "Self-diagnostic result" for "ICC" with CONSULT-III. Refer to ICC (Full Speed Range).
Is DTC detected?
YES - Repair or replace malfunctioning parts.
NO - GO TO 2.
2.CHECK INTERMITTENT INCIDENT
Refer to Intermittent Incident.
- INSPECTION END